EasyManua.ls Logo

Spark L50 - Introduction; Intended Use; Environment Protection; Machine Data Label

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Introduction
This manual is only intended for end user and provides necessary information for operating
the machine. It contains the safety, operations, maintenance and the specifications of the
machine.
CAUTION Read all instructions before operating or maintaining this
machine.
The machine will provide the optimal service, if:
Operate the machine properly.
Maintain the machine regularly according to the maintenance instructions.
Maintain the machine with manufacturer supplied or equivalent parts.
If you have questions about the instructions and explanations of this manualplease contact
CenoBots.
Intended Use
L50 is an automatic drive, LFP battery poweredwide area used, AI-power scrubber dryer
robot. This machine is intended for commercial use, for example in hotels, schools, hospitals,
shopping mall, offices and rental businesses. It’s designed to clean the hard floor (such as
tile, wood floor, Concrete, terrazzo, Granite, etc.) in indoor areas.
Environment Protection
Please dispose of packaging materials and used machine components such as
batteries in an environmentally safe way according to your local waste disposal
regulations.
Machine Data Label
The model and serial number of the machine are shown on the nameplate which is located at
the rear of the machine. This information is needed when ordering repair parts for the machine.
Please note the machine model and serial number as below: