H.264 Network Digital Video Recorder User Manual
Page 27
Picture 4.4 Motion Detect
【Channel】Choose the set motion detect channel.
【Enable】■ means that the motion detect function is on.
【Sensitivity】Choose in the six options according to the sensitivity.
【Region】Click setup and enter the set area. The area is divided into PAL 8x8. Green block means the
current cursor area. Yellow block means the dynamic detect defensive area. Black block means the
unfenced area. You can set the area as followed, Drag the mouse and draw the area.
Picture 4.5 Region
【Period】Trigger the motion detect signal in the set time section. You can set according to week or set
uniformly. Each day is divided into four time sections.■ means the set valid.
To Next Page
Loading...
