Specialized LEVO 2022 - C H a I N G U I D

5 MM
DECBH IA
F
GJ
1
2
CHAIN GUIDE
# PART NAME PART NUMBER QTY SPEC TOOL
TORQUE
COMMENT
Nm in-lbf
A Chain Guide - Back Plate
S211200004
N/A N/A N/A
SETTING THE CHAIN GUIDE POSITION:
 Shift to the lowest gear.
 1: the outer chain guide face upwards.
 2: Loosen the chain guide bolt and align the lower edge of the inner chain guide face to 5 mm above the
chain, then torque the chain guide bolt to specification.
 Rotate the outer chain guide face downward and locate it into position making sure the guide does not
come in contact with the spider.
The Levo chainguide comes pre-aligned from the factory. Do not add or remove any
spacers from the original build.
B Chain Guide - Inner Plate N/A N/A N/A
C Chain Guide - Outer Plate N/A N/A N/A
D Mounting Nut M8 mm X 1.0 mm P 5 mm hex 4.5 40
E O-Ring O-RING 9 mm ID X 1.5 mm W N/A N/A N/A
F Back Plate Dowel Pin PIN DOWEL, 2.5 mm OD X 6 mm N/A N/A N/A
G Mouting Bolt M8 x 1.0 mm P, SLOT N/A 4.5 40
H Spacer Inner 8.2 mm ID X 12 mm OD X 0.5 mm W N/A N/A N/A
I Spacer Outer 8.2 mm ID X 12 mm OD X 1 mm W N/A N/A N/A
J Spacer Back CUSTOM SPACER 10.2 mm ID X 21 mm OD X 2 mm W N/A N/A N/A
PAGE 14
2022
TECHNICAL GUIDE