Specialized LEVO 2022 - Cable Guide & Dropper Post Stopper - Alloy Frame

2
1
A
C
B
G
F
2
1
26.982
CABLE GUIDE & DROPPER POST STOPPER - ALLOY FRAME
# PART NAME PART NUMBER QTY SPEC TOOL
TORQUE
COMMENT
Nm in-lbf
A ICR Guide Bolt
S216500004
1 M4 x 12 mm x 0.7 mm P 2.5 mm hex 4 35.5
B ICR Motor Housing Guide 1 N/A N/A N/A
C Washers 2 M4 mm x 4.2 mm ID x 7 mm OD x 0.8 mm THK N/A N/A N/A
F Seatpost Limiter Bolt 1 M4 x 12 mm stainless steel bolt 2.5 mm hex N/A N/A The stopper is used to stop contact between the dropper post and the motor
G Seatpost Limiter Nut
1 M4 nut stainless steel 7 mm socket wrench N/A N/A
MOTOR HOUSING CABLE GUIDE ASSEMBLY
 1: Place the ICR Guide against the frame with the holes aligned with the frame holes.
 2: Insert the screws then torque to spec.
DROPPER STOPPER ASSEMBLY
 1: Insert the limiter bolt through the hole in the frame.
 2: Tighten the limiter nut on the inside of the frame and tighten to secure the bolt to the frame. Take care not to over tighten.
PAGE
6
2022
TECHNICAL GUIDE