Specialized LEVO 2022 - Spider & Crank Assembly

CRANK CARBON NDS 160 mm S211600021 CRANK CARBON NDS 165 mm S211600008
CRANK CARBON DS 160 mm
S211600020 CRANK CARBON DS 165 mm S211600007
CRANK ALLOY NDS 160 mm
S211600019 CRANK ALLOY NDS 165 mm S201600022
CRANK ALLOY DS 160 mm
S211600018 CRANK ALLOY DS 165 mm S201600021
A
F
B
C
D
D
E
G
1
2
SPIDER & CRANK ASSEMBLY
# PART NAME PART NUMBER QTY SPEC TOOL
TORQUE
COMMENT
Nm in-lbf
A Chain Ring
S211400009
1 SRAM EAGLE 34 Teeth 104 mm BCD STEEL EMTB W/BOLTS N/A N/A N/A
B Chain Ring Bolts 4 5 mm hex 10 89
C Spider S195100001 1 SPIDER,104 mm BCD N/A N/A N/A
D Spider Groove Nut S166800011 1 Levo ISIS Groove Nut ParkTool BBT-18 or Shimano TL-UN96 50 443
E Crank VARIOUS Carbon & Alloy 160 mm 8 mm hex 40 354 Compatible with Levo Gen2; 165 mm Cranks
F Brose Cap Puller S175300006 1 N/A N/A N/A
G O-Ring S221600011 1 O-RING, 23.5 mm ID x 2.4 mm OD, Drive Side Grease N/A N/A
 1: Remove the spider groove nut from the spindle.
 2: Place the Brose cap puller over motor spindle
 3: Locate the jaws of the 2-jaw puller under the spider with the screw tip located on the cap.
 4: By turning the handle on the 2-jaw puller, slowly remove the spider from the spindle.
PAGE
17
2022
TECHNICAL GUIDE