ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
Change the name of USER1, USER2 and USER3.
Click “ENTER” after naming.
Passwords can be changed for ADMIN, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the remote control. Select username
and enter the current password. And, enter a new password, enter the same password
again to confirm and select OK. Then the message “PASSWORD CHANGED” is
displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
Set authority level of playback on each user.
Checked box: authorized to playback. Blank check box: no authority.
Disconnect the remote playback after the specific time (Disable, 5min, 10min, 15 min,
30min, 60min.
To Next Page
Loading...
