37
4-3. Setup – RECORD Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Figure 4.3.1. RECORD Setup Screen
Table 4.3.1. Menu Items in RECORD Setup Screen
Select a channel for applying the following settings using the mouse or the remote
control. To change the values of all channels, take the following steps. Select the
button to change the values of all channels.
Assign the recording mode for the selected channel.
Options are: Continuous, Motion, Schedule or Disable.
To Next Page
Loading...
