Speco N4NS - 7 Network Access Using the Multi-Sites Network Viewer; Overview; PC Requirements

71
7. Network Access Using the Multi-Sites Network Viewer
7-1. Overview
The SpecoTech Multi Client is a multiple site monitoring client software with; video, audio, and alarm signals
from the NS over the network. The SpecoTech Multi Client does not limit the number of NS units to register.
The program displays up to 16 NS units and supports dual monitors.
On the program, user may control PTZ cameras on the NS. By attaching a microphone and speaker system
to devices on site, the user may make bi-directional audio communication over the network.
7-2. PC Requirements
Minimum PC Requirements
Recommended PC Requirements
Before installing the program, check the PC specifications. The NS remote software may not perform
correctly if the PC does not meet the minimum requirements.
CPU
Intel Core i3
1.8Ghz
Memory
2GB DDR2
VGA
512MB
Resolution
1280x720
Disk Space
1GB
OS
Windows 2000, XP Professional, XP Home, Vista, 7 (NOTE: Not all versions of Vista and 7
are supported)
Network
10/100Base T
Others
Direct X 9.0c or Higher
CPU
Intel Core i5
2Ghz or higher.
Memory
4GB DDR3 or higher.
VGA
512MB or higher.
Resolution
1920x1080
Disk Space
1GB
OS
Windows 2000, XP Professional, XP Home, Vista, 7 (NOTE: Not all versions of Vista and 7
are supported)
Network
10/100/1000Base T
Others
Direct X 10 or higher.