Do you have a question about the SpeedAngle GMOS JI100S and is the answer not in the manual?
Brand | SpeedAngle |
---|---|
Model | GMOS JI100S |
Category | Timer |
Language | English |
Instructions for installing the GMOS dashboard unit and its bracket.
Guidelines for correctly installing the GMOS sensor unit on the motorcycle.
Overview of functions available within the GMOS System Menu.
Details on adjusting settings like clear memory, time zone, and screen brightness.
Describes the hands-free auto features for the lap timer.
How the Finish Line is set automatically and how to control its location.
Overview of various timer settings available in the Laptimer Menu.
Details on viewing logs, activating auto set, designating tracks, and setting timer parameters.
Options for setting stop timer, line width, display modes, and freeze time.
Steps for installing the driver, connecting GMOS to PC, and recognizing the device.
How to launch R4, access Log Downloader, and connect to download recorded data.
Addresses the "NO SENSOR" message and checks for proper connection.
Explains why the lean angle needle might not move and how to fix it.
Discusses causes for smaller/larger lean angles and installation checks.
Reasons for lean angle history not updating and potential adjustments.
Explains why GPS speed might read zero due to poor signal reception.
Addresses issues preventing GMOS from recording logs.
Explains why the G-force bar may not return to zero and potential solutions.
Discusses reasons for no lap time recording at the Finish Line.
Troubleshooting steps if the "USB CONNECTED" message doesn't appear.