Spektrum DX8 - Governor Function

To Activate the Swashplate E-Ring Function
GOVERNOR
Adjusting the Governor Values
Rotate the roller to select the
desired governor value. Press to
access. Rotate to adjust the value.
Note: the
displayed value is
the corrected
governor value.
0% represents
1.500ms or off
with most
governors.
The Governor
function adjusts
engine rpm when
using a Governor or
throttle limiter. You
can program up to
four governor values
to be selected from
a variety of switches
including the flight
mode switch. You
can adjust Governor
values in .5%
increments to allow
for precise rpm
adjustments. Also,
you can program
the channel the
governor controls.
To Activate the
Governor Function
With the transmitter
on and the main or
telemetry screen
displayed, press
the roller. The
Function list
displays.
Rotate the roller to
highlight Governor
then press to access
that screen.
12 SPEKTRUM DX8 • RADIO INSTRUCTION MANUAL
Highlight E-ring then press the roller to access the Electronic Cyclic Ring function.
Repeat this for all desired governor values.
Normal:
0 OK +-
Stunt 1: SO . O K
Stunt 2: [ $ 6 . O K 1
Hold:
0 . O K
Ch: Aux£ Sw: F Mode