Spektrum DX8 - Pitch Curve Programming

the Governor is
plugged into. The
governor and the
gyro must use two
different channels. If
the gyro function
uses a channel, it
will not appear in
the governor list.
Rotate the roller to
highlight Ch:
(channel) then press
to access that
function. Select the
channel the
governor will be
plugged into.
Normally Aux 2 is
used.
PITCH
CURVE
The DX8 features a 5-
point Pitch curve. You
can set up to four
separate Pitch curves.
A graph displays at the
left side of the screen
to aid in adjusting pitch
curves. An Expo
function is available
that smooths out the
curve.
To Program Pitch
Curves
With the transmitter on
and the main or
telemetry screen
displayed, press the
roller. The Function list
displays.
^Selecting a Flight Mode
Highlight
t
h
e
d
e
s
i
r
e
d
f
l
i
g
h
t
m
o
d
e
a
t
t
h
e
t
o
p
o
f
12 SPEKTRUM DX8 • RADIO INSTRUCTION MANUAL