The following screen appears. Rotate the roller to highlight the desired model then press to select.
The model name will display on the main screen.
Model Select
<B A C K >
Model 1: Mdl01-Acro
odel 2: Mdl02-Acro
Model 3: MdlQ3-Acro
Rotate the roller to highlight Model Type then press to access the function. The following screen
appears:
Model Type ItliZ
Helicopter
Rotate the roller to highlight the desired model type (Helicopter or
Airplane) then press the roller to select.
You can return lo the
System Setting
screen at anytime by
pressing the
Back
button on the transmitter
once.
To return to the
Main
screen press the
Back
button on the
transmitter
twice
or press and hold the
Roller
lor more than
three seconds.
12 SPEKTRUM DX8 • RADIO INSTRUCTION MANUAL
MODE
L
TYPE
Model Type programs the
selected model memory to
function in Helicopter or
Airplane programming. You
should program Model
Type first when setting up
a new model. Note: You
can assign each model
memory its own model
type.
To Access the Model
Type Function
Press and hold the roller
while turning on the
transmitter. When
System Setup appears
on the screen, release
the roller. The DX8 is
now in System Setup
Mode. if
The following screen
appears. Rotate the
roller to highlight YES
then press the roller to
accept the model type.
Selecting NO will return
you to the previous
screen.
Airpla
ne
To Next Page
Loading...
Need help?
General
Weight and Dimensions
