Spektrum DX8 - Aileron to Rudder Mix

AILERON TO RUDDER MIX
Use Aileron to Rudder mixing to overcome adverse yaw characteristics with certain types of
aircraft such as the J3 Cub and make coordinating turns easier.
To access Aileron to Rudder Mix
IIf you accessed the flap option in wing type in the system setup mode, the elevator to flap
mix will display. Rotate the roller to highlight ELE > FLP then press. Now rotate the roller to
select Ail > RUD and press. The aileron to
rudder Mix screen appears.
R
e
h
a
o
F
n
o
n
Highlight EXPO then press the roller to access
the Pitch Curve Expo function. Select Inh or Act to inhibit or
activate the SPEKTRUM EDX8 ftjRADKnNgsrRU CTON
MANUAL
Rotate the roller to adjust the selected point to the desired output position. Note the
position on the graph at the left of the screen.
12