Spektrum DX9 User Manual

23
SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL
EN
Serial Number
The Serial Number screen displays the transmitter serial number
and AirWare software version.
Reference the Serial Number screen any time you need to
register your transmitter or update the AirWare software from the
SpektrumCommunitywebsite.
Exporting the Serial Number to the SD Card
Youmayndithelpfultoexportthetransmitterserialnumbertoa
textleforyourpersonalrecordsorwhenyouareregisteringthe
transmitterontheSpektrumCommunity.
To export the transmitter serial number:
1.InsertanSDCardinthecardslotonthetransmitter.
2. Scroll to EXPORT and press the scroll wheel. The SD Status
screenappearsandshoulddisplayMY_DX9.xmlinthemiddle
of the screen.
3. Press the scroll wheel again to return to the Serial Number
screen.
4.PoweroffthetransmitterandremovetheSDCardfromthe
transmitter.
5.InstalltheSDCardinacardreaderconnectedtoyour
computer.
6.OpentheMY_DX9.xmllefromtheSDCardlocation.You
can then copy and paste the serial number into your personal
recordsortotheSpektrumCommunitywebsite.
Locating the Transmitter AirWare Software Version
The transmitter AirWare software version appears between PREV
and NEXT at the bottom of the Serial Number screen. Register
your DX9 to get AirWare software updates and other news at
spektrumrc.com
IMPORTANT: AirWare files are specific to the transmitter
serial number and you cannot transfer AirWare files between
transmitters, ie., downloading an AirWare software update once
and attempting to install it on multiple transmitters.
Calibrate
TheCalibrationscreenstoresthepotentiometerendpointsforall
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection.
Calibrating the Transmitter
1.Carefullymovethegimbalsticksina+shapemovingfrom
left to right, then up and down. Press gently on the gimbals
at the stops to achieve an accurate calibration. Return both
gimbal sticks to the center position.
2. Move the Left and Right Side Levers to the top and bottom
positions, then move the side levers to the center position.
IMPORTANT: Onlymoveonesideleveratatimeduring
calibration.
3. Move the Knob to the full clockwise and counterclockwise
positions, then return the Knob to the center position.
4. Select SAVE to store the calibration.

Spektrum DX9 Specifications

General

Interface	RF Wireless
Product color	Black
Brand compatibility	Spektrum
Compatible products	Spektrum BLADE 450X BNF[BLH4380A]\\r 300 CFX BNF Basic[BLH4650]\\r 300 CFX BNF Basic[BLH4650]\\r Nano QX FPV RTF w/ SAFE[BLH7200]
Backlight color	Blue
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Language version	English
Channels quantity	9 channels
Number of devices supported	1
Battery capacity	2000 mAh

Weight and Dimensions

Weight	- g