Flap to Elevator (FLP > ELE)
Flap to Elevator mix prevents pitch up tendency that occurs when Crow or Butterfly
mixing is applied. This mix is typically used only with the Camber System. The Flap
to Elevator mix operates as a curve so the elevator response can be matched to
specific points in the spoiler stick travel. This enables the pilot to ensure the elevator
compensation is correct throughout the flap range.
For sailplanes with ailerons/tips/flaps, ensure an appropriate Sailplane Type is
selected in Model Setup so that tips appear in the transmitter as RAIL and LAIL.
Decrease or increase travel on the tip ailerons by creating an AIL > RAIL mix.
To Next Page
Loading...
