AS3X
®
To use this feature, the Telemetry menu must first be configured for use with AS3X
®
technology in Model Setup, and the iX14+ must be bound to a compatible AS3X
receiver that has been configured for remote gain. Receiver configuration is done
separately from the iX14+ setup. Refer to the receiver manual for more information.
When using a compatible AS3X receiver, the AS3X menu allows:
• Gains to be adjusted from the transmitter
• Selection of the gain adjustment input
switch
• Selection of the channel through which
gain adjustments are made
• Selection of the flight mode switch
• Real time display of gain values for
Roll, Pitch and Yaw
To Next Page
