The AS3X Gains menu displays the following for each flight mode:
Axis: Roll, Pitch and Yaw
Rate: Rate gain values
Heading: Heading gain values
Actual: The current gain value taking into account the priority gain and the stick
position of that channel
Gain: Represents the gain channel output position. This number is the percentage of the
preset gain the receiver is using. 100 will pass through the full gain setting, 50 in
this value would mean the receiver is using 50% of the gains set in the receiver
configuration. The Gains value affects all axis, heading hold and rate gains that are
assigned as RELATIVE. This value can only reduce the gain from the value set in
the receiver configuration, it cannot raise the gain above the preset value.
Input:
Allows the selection of any of the L, LTT, R or RTT Trim switches to adjust the
gain.
To Next Page
Loading...
