To add a stick input model start warning:
1. From Model Setup, touch Model Start Warnings.
2. Select the STICK INPUT trigger type.
3. Touch the + icon to add a new warning. Touch the (
), if available, to remove a
current warning.
4. Select the desired input from the popup
menu.
5. Select Over or Under to define which
side of the given input position the
warning will trigger.
6. Define the trigger point value. Values
from -100 to 100 can be entered.
7. Select the type of warning and enter
text-to-speech if Voice is selected.
To Next Page
Loading...
