Mode: Mode refers to how the control stick arrangement. Four modes are available,
though most pilots use Modes One or Two. Mode Two is the iX14+ default and is
preferred by most North American pilots. Changing to Mode One or Three requires a
physical change to both transmitter sticks. Refer to the Physical Transmitter Adjustments
section for detailed instructions on physically changing the stick layout. The transmitter
must have the power cycled before any mode change takes effect. Then recalibrate the
transmitter prior to flight. See the Calibration section for more information.
Language: Language changes in this menu will change the language within the
Spektrum AirWare application.
Tx Battery Alarm: The default value for the remaining battery capacity alarm is
10%. This value can be changed by touching the drop down menu and selecting the
desired value from the list. Warning type and spoken-text can be changed as well.
Tx Inactivity Alarm: Define the time before the inactivity alarm triggers, as well as
the type of warning and spoken texts.
To Next Page
Loading...
