TX Auto sleep (Default 5 min): If the inactivity alarm continues for the set length
of time, the system will automatically go into sleep mode to prevent accidental
discharge of the battery.
Audio Event FIFO on/off (Default off): Enables the audio events, first in first out
feature. This setting plays every audio event in the order they are triggered without
audio events ‘stepping on or over’ each other. If many audio events are active, this
setting can cause the system to backlog events which may cause the system to
speak for some time, depending on the number of alerts.
Telemetry Warning Pop Up (Default on): Enables or disables telemetry warning
pop-ups on the transmitter screen. The pop-ups include an option to clear the warning.
Startup Tone (Default on): Enables the tone at the startup of the app.
Dark Mode (Default off): Sets the default screen tone to dark. This option
requires an app restart for any change to take effect.
Screen brightness: The slider sets the brightness of the transmitter screen.
To Next Page
Loading...
