Aircraft will not
Bind
(during binding) to
transmitter
Transmitter too near aircraft
during binding process
Move powered transmitter
a few feet from aircraft,
disconnect and reconnect flight
battery to aircraft
Aircraft or transmitter is too
close to large metal object
Move the aircraft or
transmitter away from the
large metal object
The bind plug is not installed
correctly in the bind port
Install bind plug in bind port
and bind the aircraft to the
transmitter
Flight battery/transmitter
battery charge is low
Replace/recharge batteries
Transmitter is EU version and
receiver is DSM2
The iX14+ EU version is not
compatible with DSM2 receivers
To Next Page
Loading...
