Splicecom PCS 552 - Alternative Method to View the Directory

PCS 552 User Manual
Contacts Directory
26 PCS 552 User Manual V3.2/0312/1
Alternatively, this method will allow you to continue talking to the caller while searching the directory for
the contact you require.
1
Press the Contacts button to access the directory
2
Use the Search facility to find the contact required
3
Press the context sensitive key beside the contact you wish to call.
4
The list of numbers stored for this contact will be displayed.
5
Press the context sensitive key beside the number you wish to dial.
6
Your original call will be put on hold and the new call will be made.
7
Wait for the call to be answered and announce the call
8
Transfer the call by replacing your handset or by pressing the Speaker button. You will no
longer have control of the call.
For further information please refer to the Transfer a call section from page 11.
Alternative method to view the directory
An alternative way to search for entries within the Contacts Directory is to enter each letter of the name
required by pressing a key on the keypad multiple times until the letter required is entered in the search
facility. For example, if you wished to enter the letter R you would press the number 7 three times. To use
this alternative search method you will need to change your default settings as follows.
Disable the default Keypad Mode
1
Select the Favourites button
Settings
2
Select the context sensitive key beside Settings
Defaults..
3
Select the context sensitive key beside Defaults
Keypad Mod 
4
Press the context sensitive key beside Keypad Mode to remove the tick
and disable this feature.
Back 
5
Press the context sensitive key beside Back to return to the Settings menu.
Home
6
Press the context sensitive key beside Home to return to your home page.
Searching the directory with the Keypad Mode turned off
1
Press the Contacts button to access the directory
2
You will be presented with a Search facility to assist you in finding the contact you
require.
3
Press the key on the keypad displaying the letter you need
A
4
The first letter on this key will be entered in the search box.
C
5
Continue to press the key until the letter required has been entered.