Spon XC-9031V - Network Parameter Configuration

IP Video Intercom Paging Console User Manual
10
Network parameters
The meanings of the parameters are as follows:
SIP account
number/passwo
rds
The ID number of the terminal is 1 by default and can not be repeated with other
terminals. The password is the server password, and the default is 1234.
Network
connection type
Static IP: set static IP by default, user defined IP address and other information.
Dynamic IP: dynamically assign IP addresses via DHCP
Device IP
IP address of the device, the default IP of the factory is 192.168.1.101, and can not
be duplicated with other terminals.
Network port
This machine SIP port, please do not modify without special situation.
Subnet mask
Mask of terminal subnet
Default gateway
Gateway of the terminal's network
Preferred DNS
The IP of the domain name parser of the preferred network on which the terminal is
located.
Standby DNS
The IP of the standby domain name parser of the network on which the terminal is
located.
Server IP
Terminal login server address
SDK IP
Server IP, the factory defaults to 192.168.1.13
Note: all the parameters of the web page should be effective after click “save”.