Need help?Do you have a question about the Spon XC-9031V and is the answer not in the manual?
General| Brand | Spon |
|---|---|
| Model | XC-9031V |
| Category | Intercom System |
| Language | English |
General safety guidelines and warnings for equipment operation, including potential hazards and precautions.
Instructions for initial setup, wiring, and physical installation of the IP video intercom paging console.
Operating instructions and important precautions for the proper use of the IP video intercom paging console.
Highlights the main functionalities and technical specifications of the IP video intercom paging console.
Details the components and ports located on the front of the IP video intercom paging console.
Details the components and ports located on the back of the IP video intercom paging console.
A comprehensive list of all items included in the product package for user verification upon receipt.
Explanation of icons used to indicate the online, offline, or disconnected status of terminals.
Procedure for customizing names and settings for individual terminals in the system.
Procedure for customizing names and information for defined zones within the system.
Steps to access the device's web interface for configuration using its IP address.
Overview of fundamental device settings and current operational status viewed via the web interface.
Procedure for customizing audio prompts for outgoing calls, incoming calls, and busy signals.
Options for device reboot, factory reset, and touch screen firmware updates.
Instructions for managing user accounts and changing passwords for web interface access.
How to initiate a call by dialing a specific terminal ID using the digital keypad.
How to initiate an urgent broadcast to all zones or terminals using the emergency button.
Choosing the audio input for zone broadcasts, including microphone, line, or USB audio files.
Using the dialpad to initiate monitoring of a specific terminal's audio and video feed.
Procedure for monitoring a single selected terminal's audio and video.
Cyclically monitoring multiple terminals based on configured time intervals.
Steps to create and manage multi-party audio discussions and conferences.
How participants request to speak during a conference using the 'Hands Up' function.
Procedures for hosts and participants to end a conference session gracefully.
How to change the display perspective during a conference session.
Manual method for participants to join an audio conference by inputting room ID.
To Next Page
