Introduction Waukesha Cherry-Burrell
Page 14 95-03080 12/2010
Elastomers
EPDM (FDA approved)
Silicone (FDA approved)
Teflon Encapsulated (FDA approved)
FKM
FFKM
Finishes/Product Contact Surfaces
15RA
20RA
Electropolish
Leg Kit
See “Motor Mounts” on page 72.
Base Mounting
Footed C-face motors
T-Frame motors. No
te: T-Frame motors can be configured
with or without bases, couplings or coupling covers.
Pedestal Mounted
Two types of stands; see “Base Mount Components” on page 10.
Motors
NEMA JM (standard) totally enclosed fan cooled (TEFC) for
close-coupled pumps
1750 or 3500 RPM single phase 115/230 volt and 3 phase
23
0/460 volt
Optional Enclosures
Washdown
Explosion proof
Severe Duty/Chemical Duty
Operating Parameters Nominal Capacity
Up to 900 U.S. GPM (204 Cubic meters/hour)
Viscosity
Up to 1500 CPS
Differential Pressure
UP to 340 Feet (100 meters)
Temperature
Up to 450°F (230°C)
Nominal Speeds
1450 or 2900 RPM - 50HZ
1750 or 3500 RPM - 60HZ