SEAT BELT AND AIR BAG
8-12
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Child seat
Child restraint
attachment
3. Insert the child restraint attachments into the ISOFIX lower
anchors until you hear click sound.
4. Adjust the seatback angle as desired.
• When using the ISOFIX lower anchor, make sure that no inter-
ference are around the bar and the seat belt is not stuck.
• Rock the child restraint to check if it is securely installed. Refer
to instructions provided by the manufacturer of the child restraint.
• Do not install the child restraint if it hinders the operations of
front seat.
WARNING
1. Remove the head restraint from the
second row seat.
2. Connect the top tether connector in child restraint to the
top tether on the seatback of the second row seat.
3. Securely tighten the child restraint by adjusting the web-
bing of top tether connector.
Top tether connector
After removing the head restraint, store it in luggage compartment
or properly secure it. In a collision or sudden stop, it may cause
personal injury.
When the child restraint is not in use, make sure to install the head
restraint in the place.
WARNING
How to use Top Tether
C100_RHD_08-Seat Belt and Air Bag.p65 2006-05-16, ¿ÀÈÄ 8:3012
To Next Page
Loading...
Need help?
General
