SERVICE AND MAINTENANCE
13-27
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
WIPER BLADE REPLACEMENT
1. Lift the wiper arm up from the
windshield.
• The tailgate wiper blade can be re-
placed in the same manner.
3. Slide the blade down and remove it
from the arm.
4. Install a new blade.
5. Put the wiper arm down.
2. Press the safety button ( ).
• Malfunctioning wipers on a raining or snowing day may be detrimental to your driving
safety. Never drive your vehicle with malfunctioning wipers on a raining or snowing day.
• Do not touch the running wipers. It may cause a personal injury.
WARNING
• Do not open the hood when the wiper arm is lifted up. The wiper and hood may be damaged.
• Do not operate the wiper when the washer fluid reservoir is empty.
• Be certain not to apply any fluid polish containing oil to the windshield of your vehicle since
this will result in streaks which impair vision. Contamination of either the window or the wiper
blades with foreign materials can reduce the effectiveness of the windshield wipers. Never
clean up the windshield with a waxed or oil-saturated cloth.
CAUTION
Wiper Blade Specifications
Driver’s
22"
Passenger’s
19"
Rear wiper
20"
Front wiper
C100_RHD_13-Service and Maintenance.p65 2006-05-16, ¿ÀÈÄ 8:3127
To Next Page
Loading...
Need help?
General
