SERVICE AND MAINTENANCE
13-12
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
FUEL FILTER AND WATER SEPARATOR (With Additional Water Separator)
Priming Pump Operating Conditions
1. If the vehicle has been run out of fuel
2. After draining water from the fuel filter.
3. After replacing the fuel filter
Before starting the engine, perform the pumping operation of
the priming pump until it becomes rigid so that the fuel pump
fills up with fuel.
Fuel filter
Water
separator
Priming
pump
C100_RHD_13-Service and Maintenance.p65 2006-05-16, ¿ÀÈÄ 8:3112
To Next Page
Loading...
Need help?
General
