SAFETY PRECAUTIONS
1-4
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4. Insert the ignition key into the key cylinder and turn it to the
“ON” position without depressing the accelerator pedal. As
soon as the glow indicator ( ) goes out, turn the key to
the
“START” position to start the engine.
5. Release the key when the engine starts. If your vehicle is
equipped with a manual transmission and is engaged
at neutral (N), it is ok to release the clutch pedal when
the engine runs.
6. Warm up the engine in idling speed. Do not warm up the
engine excessively.
7. Make sure that there are no persons or obstacles in the
danger area around the vehicle.
8. Release the parking brake.
9. • Automatic transmission equipped vehicle
Keep the brake pedal depressed and shift into the
“D”
position. Make sure that the position indicators of “D”
are coming on. Slowly release the brake pedal to begin
moving.
• Manual transmission equipped vehicle
Keep the brake pedal and clutch pedal depressed and
shift into the
“1” position. Release the brake pedal and
gradually depress the accelerator while slowly releasing
the clutch to begin moving.
C100_RHD_01-Safety Precautions.p65 2006-05-16, ¿ÀÈÄ 8:274
To Next Page
Loading...
Need help?
General
