IN CASE OF EMERGENCY
12-2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
STARTING THE ENGINE WITH JUMPER CABLES
If the batter is weak or dead, the battery from another vehicle can be used with jumper cables to start the engine.
Discharged battery
Booster battery
Connecting order:
(1) The + terminal of the discharged battery
(2) The + terminal of the booster battery
(3) The - terminal of the booster battery
(4) Connect one end of the other jumper cable to the body
of the discharged vehicle, such as the engine block or a
front towing hook.
The positive (+) cable to the positive
(+) terminal.
The minus (–) cable to the minus (–)
terminal.
Be sure to observe the connecting se-
quence specified below.
• Start the engine of the booster vehicle after
connecting the cables.
• Be careful not to have the jumper cable
caught in the cooling fan.
CAUTION
C100_RHD_12-In Case of Emergency.p65 2006-05-16, ¿ÀÈÄ 8:312