IN CASE OF EMERGENCY
12-11
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
7. Then mount the spare tire and temporarily tighten the wheel
nuts until the spare tire wheel is no longer loose.
9. Tighten up the wheel nuts in the diagonal sequence as
shown in the picture. Each nut should be turned a couple
of times at a time.
10. When done with mounting the spare tire, place the flat
tire in the luggage room. Store the jack and other emer-
gency tools in their storages.
8. Lower the vehicle by rotating the combined wrench
counter-clockwise until the tire touches the ground. Re-
move the jack.
Tighten up the wheel nuts in the di-
agonal sequence as shown in the
picture. Each nut should be turned a
couple of times at a time.
By tightening up the spare tire until it is not loose any more, you can
avoid any tilting of the tire on the wheel hub when the tire touches the
ground.
WARNING
While the jack is supporting your vehicle, do not use too much force to
tighten the nuts. Otherwise, the vehicle may slip off and you may get
injured.
WARNING
C100_RHD_12-In Case of Emergency.p65 2006-05-16, ¿ÀÈÄ 8:3111
To Next Page
Loading...
Need help?
General
