1 Features
• STM32N657X0H3Q Arm
®
Cortex
®
‑M55‑based microcontroller featuring ST Neural-ART Accelerator, H264
encoder, NeoChrom 2.5D GPU, and 4.2 Mbytes of contiguous SRAM, in a VFBGA264 package
• 5" LCD module with capacitive touch panel
• USB Type-C
®
with USB 2.0 HS interface, dual‑role‑power (DRP)
• USB Type-A with USB 2.0 HS interface, host, 0.5 A max
• 1‑Gbit Ethernet with TSN (time-sensitive networking) compliant with IEEE‑802.3‑2002
• SAI audio codec
• One MEMS digital microphone
• 1‑Gbit Octo‑SPI flash memory
• 256-Mbit Hexadeca‑SPI PSRAM
• Two user LEDs
• User, tamper, and reset push-buttons
• Board connectors:
–
USB Type-C
®
– USB Type-A
– Ethernet RJ45
– Camera
– microSD
™
card
– LCD
– Stereo headset jack including analog microphone input
– Audio MEMS daughterboard expansion connector
– ARDUINO
®
Uno R3 expansion connector
– STMod+ expansion connector
• On-board STLINK-V3EC debugger/programmer with USB re-enumeration capability: Virtual COM port, and
debug port
• Comprehensive free software libraries and examples available with the STM32CubeN6 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
• Handled by STM32CubeMonitor-UCPD (STM32CubeMonUCPD) software tool.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3300
Features
UM3300 - Rev 1
page 2/49
To Next Page
Loading...
