ST X-CUBE-SBSFU User Manual

Package description UM2262
36/94 UM2262 Rev 6
The package is provided as a zip archive containing source-code.
The following integrated development environments are supported:
• STM32CubeIDE and System Workbench for STM32 (SW4STM32)
• IAR Embedded Workbench
®
for Arm
®
(EWARM)
• Keil
®
Microcontroller Development Kit (MDK-ARM)
Note: The KMS feature is available on the STM32L4 Series with example provided on the
B-L475E-IOT01A board.
The STSAFE-A100 feature is available on the STM32L4 Series with example provided on
the B-L475E-IOT01A board
6.2 Architecture
This section describes the software components of the X-CUBE-SBSFU package illustrated
in
Figure 12.
Figure 12. Software architecture overview
Application level
Middleware level
Drivers
User
application
SBSFU sample application
Hardware abstraction layer
(HAL)
Board support package
(BSP)
Utilities
CMSIS
PC
software
Secure
Engine
Cryptography
Secure Boot
Root of Trust
Secure
firmware
loader
Firmware
image
programming
Key
management
services
STSAFE-A

ST X-CUBE-SBSFU Specifications

General

Brand	ST
Model	X-CUBE-SBSFU
Category	Computer Hardware
Language	English