Stakpure Omnia Tap xs basic - Safety Instructions; Hazard Warnings

8
_________________________________________________________________________________
OmniaTap xs
basic
; Version August 2023
Subject to technical changes
2 Safety instructions
The safety instructions described below are for your own safety and help to prevent possible damage
to the OmniaTap xs system. Read the instructions before installation, commissioning and maintenance
and follow them carefully.
Danger of electric shock!
Improper electrical supply of the OmniaTap xs system can lead to an electric shock!
- For the electrical supply of the OmniaTap xs system, only use the wide-range
power pack included in the scope of delivery.
- For the electrical supply of the wide-range power pack of the OmniaTap xs system,
only use a properly grounded socket that provides an AC voltage of 100-240V with
50-60Hz.
- For maintenance work, the rear housing cover may only be opened when the
mains plug is unplugged.
Danger from falling!
Improper handling or attachment can cause the OmniaTap xs system to fall and
cause injury!
- Always ensure that the system is in a secure position.
- When mounting on a wall, ensure that the system is mounted in a correspondingly
stable manner.
- When handling / transporting the system, observe the system's attachment
points, which you can find in this operating manual.
Danger from slipping!
Incorrect or faulty installation or operation as well as a leak in the system can lead
to the uncontrolled escape of liquid and thus to a risk of slipping!
- Always ensure that the system is operated correctly and always use a sufficiently
large container when withdrawing water.
- Make sure the inlet and outlet lines are tight.
-
Make sure that the rinsing water is drained into a drain without pressure.