– 19 –
ENGLISH
7 Insert only the original (the upper
paper) into the slit of the auto cutter.
Insert the paper onto which you
wish to copy (the lower paper) be-
tween the platen and the auto cutter.
8 Pull on the edge of the paper to
remove any slack and then lower the
auto cutter.
9 Insert the paper through the paper
outlet and then replace the cover by
reversing the removal steps.
Note: • When the paper end mark
appears on the paper, re-
place the roll paper before it
runs out.
• When using the optional
paper rewinder, please re-
fer to the separate User’s
Manual PW2000-24.
Fig. 6-16 Paper outlet of the front
cover
Fig. 6-17 Mounting the cover
Paper
outlet
Auto cutter
To Next Page
Loading...
Need help?
General
