3. Press ESC; the dialogue shown at the left is displayed.
4. Press ESC to select a different country by performing step 1
and step 2, or
Press SET for a longer period of time (> 1 s) to confirm the
currently selected country. The check list is shown.
Country selection
———————————————————————————
NOTICE
The country can only be set once!
———————————————————————————
1.
Press rs to select a country.
2. Press SET.
3. Press ESC; the dialogue shown at the left is displayed.
4. Press ESC to select a different country by performing step 1
and step 2, or
Press SET for a longer period of time (> 1 s) to confirm the
currently selected country. The check list is shown.
EN
747,431 | Z09 | 2015-09-30
43
To Next Page
Loading...
