V01-2013 35mm-01 serie
5
3.2 PICTURE.
The rear screen projection method via an optical compensation system is done with
18-face revolving prism (polygon). With the high quality surface mirrors, optics and
screen material gives this a very brilliant, bright and sharp image.
The standard dimensions of the projection are 212 x 288 mm.
Accurate film transport is achieved by revolving sprockets .
The picture lamp can easily be replaced and adjusted.
In stand-still mode the light is automatically dimmed to prevent heat damages to the
film. The easy threading of film and perforated tape saves time and protect the film
from being damaged. (see pages 29 - 32 )
Option ST92: Cinemascope
3.3 SOUND.
High quality sound reproduction is done by plug-in pre-amplifiers.
All sound is mono, however stereo SEPMAG is optional available.
COMMAG sound mono is optional available.
ST3511: COMOPT, mono
ST(1)401: COMOPT, mono 1 track of SEPMAG (mono)
ST701 COMOPT, mono 2 track of SEPMAG (mono)
ST721: 1x COMOPT, mono 2 track of SEPMAG (mono)
-summing amplifier with: treble / bass / master volume adjust.
head phone output with ¼” jack.
-2 loudspeakers 2 way, 2 x 30 watt.
The so called synchronize points for film and PE sound film (perforated tape) are
only available on request as an option.
To Next Page
Loading...
Need help?
General
