V01-2013 35mm-01 serie
12
5.0 HOW TO USE THE STEENBECK 35mm 01 - SERIES:
Read this section carefully, study all the possibilities and run some tests.
Make the most important actions your own.
5.1 GENERAL OVERVIEW: (fig. 1 page 9)
1 drive deck
2 friction left
3 friction right
4 ruler
5 ground glass (back lit), to check film
6 speed switch
7 sound preamplifier section
8 universal counter /display (fig. 15)
9 switch board
10 pressure switches
11 screen holder
12 -
13 -
5.2 SWITCH BOARD and PRESSURE SWITCHES: (fig. 2 page 10)
Switches 16 t/m 19 are the so-called sub functions.
14 main power on / off switch
15 pilot lamp
16 on / off switch sound
17 on / off switch picture lamp
18 on / off switch 2
nd
picture lamp (ST721 only) or switch video lamp
19 on / off switch back light ground glass
20 rotary knob for dimmer working lamp (optional)
21 pressure switch for synchronous speed 24 or 25 f.p.s.
The selected speed is indicated by a green LED on the counter display
22 interlock: not in use since 2010
23 -
24 -
5.3 SOUND PREAMPLIFIER SECTION (fig. 3 page 10)
25 pressure switch for optical sound lamp (OPT. 2)
26 pressure switch for 2
nd
optical lamp (SEPOPT – OPT. 1)
27 summing amplifier, with treble, bass and master volume control
28 headphone ¼” jack (mono)
Don’t use a head phone with less than 600 Ohm impedance
29 magnetic preamplifier
30 optical preamplifier
31 -
32 -
33 -
To Next Page
Loading...
Need help?
General
