V01-2013 35mm-01 serie
8
4.2 WARRANTY INFORMATION:
STEENBECK film machines are made with the best possible accuracy and precision.
Extensive runs and tests are done on the machine prior to shipment.
STEENBECK film machines are built to achieve maximum quality, reliability, and long
life resulting in a minimum of maintenance.
There is always the possibility that within the warranty period of 1 (one) year,
after purchasing the Steenbeck, a part is not working properly.
In such case, please contact the Steenbeck factory or your local Steenbeck
agent/dealer at once.
Defective parts will be repaired or replaced by Steenbeck.
Before replacing the part, Steenbeck has the right to check the part before
replacing it.
No warranty in case of:
- the machine is used for a different purpose than what it was made for.
- deliberate damage.
- an untrained technician has worked at the machine.
- defective projection or optical sound lamp, wire breakage.
- damage the lacquer by use, bumping or cleaning with not advised solvent.
Defective parts should be send to the Steenbeck factory in Holland or the local
agent/dealer at cost and risk of the owner/user of the Steenbeck machine.
The costs for the repair or replacement of parts are in principle always
at cost of Steenbeck.
The Steenbeck factory always returns the parts free of charge. The replaced parts
are always property of Steenbeck .
If a Steenbeck engineer is required to take care of the warranty repairs or
replacements, all travelling and accommodation costs are for the owner/user of the
Steenbeck machine.
To Next Page
Loading...
Need help?
General
