37
Chapter 4: Writing on the Wave
© 2017 Stenograph
Beeper Volume
The Wave has a beeper to alert you to specific messages on the Tilting screen, such as Low Battery.
To adjust the beeper volume:
1. From the Opening menu, press Setup, Options.
2. Press the Up and Down buttons as necessary to highlight the Beeper Volume option.
3. Press the Change button to toggle the Beeper volume between Soft and Loud. The Wave emits a
softer or louder tone indicating the volume level selected.
4. To display the Opening menu, press OK, More, Quit.
To Next Page
Loading...
