Stenograph WAVE - Time and Date

Wave User Guide
58
© 2017 Stenograph
Time and Date
The Time function allows you to change the time and date on your Wave. It is important to maintain date
and time accuracy in the event you need to locate a file in Memory.
1. From the Opening menu, press Setup, Time. The Time and Date screen displays.
2. Press the Next button to select the unit of time or date you want to change.
• Month
•Day
• Year
• Hour
• Minutes
•AM/PM
3. Do one of the following:
• To increase the unit of time or date, press +.
• To decrease the unit of time or date, press -.
4. Repeat the previous steps for each unit of time or date you want to change.
5. To apply your selection, press Accept.
6. To display the Opening menu, press Quit, More, Quit.