11
Chapter 1: Setting Up the Wave
© 2017 Stenograph
Charge the Batteries
The Wave comes with one main rechargeable battery and an internal backup rechargeable battery.
Stenograph recommends that you charge the batteries in your Wave before using it for the first time.
Charging time for the main battery is approximately 4 - 5 hours. Be sure to review the additional battery
charging details in the Wave Features chapter.
To charge your Wave batteries:
1. Ensure the main battery is in the Wave. For details about inserting the battery See Changing the
Battery on page 22.
2. Plug the AC charger/adapter into a wall outlet. Use only the AC charger/adapter supplied with your
Wave.
3. Insert the small plug on the AC adapter/charger cord into the CHGR socket on the back of the Wave.
4. The Wave turns On. A black dot in the lower right corner of the Status LCD indicates the Wave is On.
A row of running blocks indicates the batteries are charging. Press the first gray button on the left
side of the Wave to turn the writing machine On and Off.
If you plug your Wave in to charge and only the black dot displays, the batteries are charged.
Charging is not necessary and no charging occurs.
To Next Page
Loading...
