Stenograph WAVE - Display Set Strokes Per Minute

39
Chapter 4: Writing on the Wave
© 2017 Stenograph
Display Set Strokes Per Minute
The Display Set Strokes Per Minute (SPM) option allows the average number of strokes per minute to
display on the Title bar and Status screen. The Title bar shows the approximate number of strokes per
minute, SPM, while writing. The Status screen shows strokes per minute data for the most recent job.
While writing, the Status screen shows strokes per minute data for the current job.
1. From the Opening menu, press Setup, Options.
2. Press the Up and Down buttons as necessary to highlight the Display Strokes per minute (SPM)
option.
3. Press the Change button to toggle the option between Yes and No. Yes is the default.
4. To display the Opening menu, press OK, More, Quit.