67
© 2017 Stenograph
Appendix B, Updating Wave Software, explains how to download available updates for your Wave from
the Stenograph web site. You must have an active Internet connection and know your customer number
and Wave serial number in order to perform the update. The Wave serial number is located on the
bottom of the writing machine?
Once you download the software update onto your computer, you load it onto your Wave via a USB
cable. To load the Wave software update via USB cable, you must first install the Wave USB driver on
your computer. The Wave USB driver is available for download from the Stenograph website. If you
need to load the Wave USB driver, See Installing the USB Drivers on page 63 for instructions.
To update your Wave software:
1. Download the update to your computer. Connect to the Stenograph web site, www.stenograph.com,
and navigate to Support/ Downloads.
2. Select Wave.
3. Right click on the selected update file to download and choose Save Target as. The Save As dialog
box displays.
The File name field displays the name of the selected file to download. Do not alter this name.
4. Select a location on your computer where you want to place the download file and select Save.
Stenograph recommends saving the file to your Desktop.
The File Download dialog box displays until the download completes copying files to your computer.
5. When the download is complete, the file displays on your Desktop, if the Desktop was selected for
the download location.
6. Load the update onto your Wave. Ensure your Wave and computer are turned On.
7. Each end of the USB cable has a different connection plug. Connect the appropriate end of the USB
cable to the USB port on the back of the Wave and the other end to a USB port on the computer.
8. Using My Computer, navigate to the location on your computer where you downloaded the
DiamanteWave update file.
Appendix B
Updating Wave Software
To Next Page
Loading...
