Stenograph WAVE - Options

Wave User Guide
48
© 2017 Stenograph
Options
Options allow you to switch the USB communication between Standard and élan Mira
®
emulation,
change the Serial Protocol, adjust the Beeper Volume and select a prompt when ending a job.
To access Options:
1. From the Opening Menu, press Setup, Options.
2. For details about each option, see the appropriate topic in this chapter:
• “Beeper Volume”
• “Display Strokes Per Minute (SPM)”
• “Keyboard Layout”
• “Prompt To End a Job”
• “Serial Protocol”
• “USB Communication”