Stenograph WAVE - Erase Memory Files

47
Chapter 4: Writing on the Wave
© 2017 Stenograph
Erase Memory Files
You can erase the memory at any time. When the memory reaches capacity, a message displays. No
further steno strokes are recorded to memory, however, you can continue to write realtime. It is important
to clear the memory if you are using software that translates steno notes from memory.
To erase Memory files:
1. From the Opening menu, press Memory, Erase All.
2. The Wave prompts you with a confirmation message to delete all the files in Memory.
3. Do one of the following:
•Press Yes to erase all the files. When the Wave completes erasing the Memory files, press OK to
return to the Opening menu.
• To keep the current files and not erase the Memory, press No. To return to the Opening menu,
press Quit.