Stenograph WAVE - Splash Screen

71
Appendix C: Wave Utilities
© 2017 Stenograph
Splash Screen
The Splash Screen is the photograph that displays briefly on the Tilting screen when turning your Wave
On. The SplashLoader Utility allows you to personalize the Wave startup screen with a photograph of
your choice.
The photograph you load can be located on the computer hard drive or removable media. It must be in
JPEG (.JPG) format. Download the Splash Screen Utility and stock photos (included in the download)
from the Stenograph web site (www.stenograph.com), Select Support, Download Center, Utilities &
Links and then Luminex/Diamante/Wave Splash Screen Loader utility. You must have the Diamante
USB driver installed on your computer to use the USB cable. If you need to load the Wave USB driver,
see the Installing the USB Driver appendix for instructions.
To personalize the splash screen:
1. Turn your computer On. Ensure that it is fully booted.
2. Download the Luminex/Diamante/Wave Splash Screen Loader Utility from the Stenograph web site.
On the Stenograph web site, select Support, Download Center, Utilities & Links and then right click
the Luminex/Diamante/Wave Splash Screen Loader Utility link, select Save Target as or Save Link
as and save it to your computer desktop or hard drive. At the Stenograph website: click Support,
Download Center and Utilities & links. Navigate to the location where you saved the file, highlight the
file, right click and select Extract All. Stock photos are also downloaded with the zip file.
3. Turn your Wave On.
4. Connect the appropriate end of the USB cable to the USB port on the Wave and the other end to a
USB port on your computer.
5. Double click the Splashloader.exe icon on your Desktop. The Diamante/Wave Splash Screen
Loader dialog box displays.
6. To select a photograph, click the Browse button to navigate to the location of the desired picture.
Highlight the file name and click OK.