STEPCRAFT D.600 - Introduction

29
EN
Introduction
These operating instructions explain the third generation of the STEPCRAFT D-Series (Items 12610 ... 12621) and in-
form you about the correct handling of the CNC system. Please read these operating instructions as well as all accompa-
nying documents in their entirety before commissioning of the system in order to become familiar with the characteristics
and the operation of the product. The improper operation of the CNC gantry milling system can lead to damage to the
product and property and can cause serious injuries, electric shock and / or re. It is imperative to adhere to the safety
instructions listed in these operating instructions at all times. Should any doubts or the need for further information arise,
do not hesitate to contact us prior to the commissioning of the CNC system. You can nd our contact details on the cover
sheet or in chapter „10 Contact“.
You can order the separately available accessories from our online shops:
The contents of these operating instructions are the intellectual property of the STEPCRAFT GmbH & Co. KG.
Forwarding or copying (also in excerpts) is not allowed without our explicit and written authorization. Any infringements
are prosecuted.
COPYRIGHT
Shop EU and Rest of World Shop USA
https://shop.stepcraft-systems.com/ https://www.stepcraft.us/
9 Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 50
9.1 General Maintenance ................................................................................................................... 50
9.2 Recommended Maintenance Work ................................................................................................. 51
9.3 Spare Parts ................................................................................................................................. 52
10 Contact � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 53
11 Limited Manufacturers Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 53