STEPCRAFT D.600 - Information and Explanation of Used Terminology; Instructions

30
EN
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Age recommendation: For advanced handcrafters ages 14 and above. This is not a toy. Should you encounter any doubts
or require any further information, please do not hesitate to contact us before commissioning of the product. You can nd
our contact details on the cover sheet or in chapter „10 Contact“.
1 Instructions
1�1 Information and Explanation of Used Terminology
These operating instructions explain the STEPCRAFT product and inform you about its correct and safe handling.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of
STEPCRAFT GmbH & Co. KG. For up-to-date product literature, visit www.stepcraft.us for customers from the USA / Canada or
www.stepcraft-systems.com for customers from the rest of the world.
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this
product. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. The safety warnings themselves do not eliminate any danger. The instructions or
warnings they give are not substitutes to proper accident prevention measures.
Signal Word Meaning of Special Language
NOTICE
Procedures which, if not properly followed, create a possibility of physical property damage AND a little or
no possibility of injury.
Procedures which, if not properly followed, create a probability of physical property damage AND a
possibility of serious injury.
Procedures which, if not properly followed, create a probability of property damage, collateral damage,
serious injury or death OR create a high probability of supercial injury.
Procedures which, if not properly followed, lead to property damage, serious injury or death.
Read the ENTIRE instruction manual, to become familiar with the product’s features and how to operate it.
This includes the entire relevant documentation of the CNC-System and all accessories! Failure to operate
the products correctly can result in damage to the products, personal property and cause serious injury, elec-
tric shock and / or re.
Do not attempt disassembly (unless it is described in the construction manual), use with incompatible
components or to augment the product in any way without the approval of STEPCRAFT GmbH & Co. KG
or STEPCRAFT Inc. This manual contains instructions for safety and operation. It is essential to read and
follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate
correctly and avoid damage or serious injury.