Options available in this reading mode:
Activation of the LED and/or buzzer (triggered by the event)
This option modifies the Step 6 of the main Wizard, with the addition of the setting of
the LED and / or the buzzer "Custom event".
Output activation de la sortie (triggered by the event)
Possibility of activating the output when an event is detected on the input,
independently of the reading of an identifier.
Realy activation (triggered by the event)
Possibility of activating the relay when an event is detected on the input, regardless of
the reading of an identifier.
At Step 3: it is no longer possible to activate the relay on detection.
To Next Page
Loading...